隨著如今人們的審美觀念不斷的提升，手提袋的外觀也越來越受到人們的重視，人們也普遍愿意使用外觀精美的手提袋包裝印刷品。那么濟南手提袋包裝印刷需要注意什么呢？下面小編就為大家簡單的介紹一下這個問題。

With the continuous improvement of people's aesthetic concept, people pay more and more attention to the appearance of handbags, and people are generally willing to use beautiful handbags to pack printed products. So what should be paid attention to in Jinan handbag packaging and printing? The following is a brief introduction to this issue.

手提袋包裝印刷品的干燥問題是比較重要的，如果干燥不好，就有可能造成圖文的不清晰、模糊，影響其觀賞性。影響手提袋包裝印刷的因素有很多，在干燥的時候要仔細的考慮溫度、濕度等問題，以避免此種情況的發生。

The drying problem of handbag packaging printed matter is quite important. If the drying is not good, it may cause unclear and fuzzy graphics and affect its viewing. There are many factors affecting the packaging and printing of handbags. When drying, the temperature and humidity should be carefully considered to avoid such a situation.

手提袋包裝印刷紙張的選擇方面，有些紙張是很厚的，有些則是比較的薄，太厚的不能進行多次折頁，太薄的又很容易損壞。因此在選擇紙張的時候，要根據印刷的需求進行具體的考慮。

As for the selection of printing paper for handbag packaging, some paper is very thick, while others are relatively thin. If the paper is too thick, it cannot be folded many times, and if it is too thin, it is easy to damage. Therefore, when selecting paper, specific considerations should be made according to the needs of printing.

另外在油墨方面，要注意油墨印刷的厚度和面積，如果在印刷的過程油墨的印刷面積過厚或者過大，手提袋包裝印刷品就可能出現氣泡的現象。這點是非常重要的，因?yàn)槿绻鹋萘藭?huì)直接的影響手提袋包裝印刷的效果和質量，對于企業的形象是不利的。

In addition, in terms of ink, attention should be paid to the thickness and area of ink printing. If the printing area of ink is too thick or too large in the printing process, there may be bubbles in the printed matter packed in the handbag. This is very important because blistering will directly affect the effect and quality of handbag packaging and printing, and is unfavorable to the image of the enterprise.

因?yàn)槭痔岽∷a(chǎn)品類屬于水墨水性體系，所以不要將溶劑型印刷油墨與水墨混合在一起使用，以免在印刷手提袋產品的時候出現手提袋印刷產品質量問題。水墨比較適合儲存在室內，室溫好保持在5度到50度。

Because the handbag printing products belong to the water-based ink system, do not mix the solvent type printing ink with the water-based ink to avoid the quality problems of the handbag printing products when printing the handbag products. Ink is suitable for indoor storage, and the room temperature is good at 5 to 50 degrees.

在使用的時候，應該把水墨用攪拌棒攪拌均勻，在測量完它的粘度之后在倒進印刷機械的墨槽。若粘度過低或者是過高的話，可以適當?shù)奶砑右恍┰龀韯┗蛘呤窍♂寗┱{(diào)節。

When using, the ink should be stirred evenly with a stirring bar and poured into the ink tank of the printing machine after measuring its viscosity. If the viscosity is too low or too high, it can be adjusted by adding some thickener or diluent.

印刷完之后應該把剩下的水墨收集起來，然后在將水墨裝到原裝桶內將蓋子蓋緊，以便下次在進行使用，至于在印刷之后殘留在印刷裝置上的水墨在完全沒有干燥的時候可以使用清水沖洗。

After printing, the remaining ink should be collected, and then the cover should be tightly closed after the ink is loaded into the original barrel so that it can be used next time. The ink remaining on the printing device after printing can be washed with water when it is completely dry.

以上便是小編為大家簡單介紹的手提袋包裝印刷注意事項，希望對于大家能夠有所幫助。大家如果想要了解更多相關的信息，請持續的關注我們網站http://buiy.cn。

The above are the precautions for the packaging and printing of handbags briefly introduced by the Xiaobian. I hope it can be helpful to you. If you want to know more relevant information, please continue to follow our website http://buiy.cn 。