1、文案及有效內容的編排應距離裁切線3MM以上，以免裁切時有文字被切到。

1. The arrangement of copy and effective content shall be more than 3mm away from the cutting line to avoid text being cut during cutting.

2、設計好的文件應將稿件的文字轉換成曲線，以免輸出制版時因找不到字型而丟失文字或出現亂碼。

2. The designed document shall convert the text of the manuscript into a curve to avoid the loss of text or disordered code due to the inability to find the font during plate making.

3、文字輸入時請不要使用系統字，會造成筆劃交錯處有白色節點。將字體轉為曲線后放大觀察，如果在文字的筆畫交錯處有白色節點的話說明此種字體是系統字或不可用于印刷的字體，需要改用其它的字體。

3. Please do not use system words when inputting text, which will cause white nodes at the interleaving of strokes. Turn the font into a curve and zoom in. If there is a white node at the staggered stroke of the text, it indicates that this font is a system word or a font that cannot be used for printing, and other fonts need to be used.

4、避免文字在PHOTOSHOP及位圖軟件打字后印刷，位圖文字印刷時會出現不同程度的模糊。

4. Avoid printing text after typing with Photoshop and bitmap software. Bitmap text will be blurred to varying degrees during printing.

5、所有輸入或自行繪制之線條色塊等圖形，其線框粗細的設定不可小于0.1mm，否則印刷成品將會有斷線或無法呈現的可能。

5. The wireframe thickness of all input or self drawn lines, color blocks and other graphics shall not be less than 0.1mm, otherwise the printed products will be broken or unable to be presented.

6、任何漸變物件不可設定“邊緣寬度”，因CTP出版系統的解譯不同，會造成漸層邊緣填色不足。

6. The "edge width" cannot be set for any gradient object. Due to the different interpretation of CTP publishing system, the gradient edge will be insufficiently filled.

7、圖片未處理好或圖片格式出錯會造成丟圖，RGB圖片或其他非CMYK32位元低于300DPI的圖片會引起變色、模糊。當使用到圖框精確裁剪時，請查看是否有鎖定至圖框精確裁剪，如未鎖定的。將丟失圖框精確裁剪內的所有物件。

7. If the picture is not processed well or the picture format is wrong, the picture will be lost. RGB pictures or other pictures with non cmyk32 bits lower than 300dpi will cause color change and blur. When using frame precision clipping, please check whether there is any lock to frame precision clipping, such as unlocked. All objects within the frame will be lost.

8、在Coreldraw9中，應用到漸變時在拼版時旋轉容易導致出現漸變層方向出錯。應用到互動效果（如：立體效果，陰影效果）時，在版本兼容及旋轉時容易導致出現效果跑位、丟失情況。請做好效果后先分離效果，再轉一次點陣圖。（溫馨提示：陰影效果如果是建立在有色彩的上面，請把陰影的單黑填色修改一下，如：底圖是黃色，在效果的黑色中加適量的黃色，C=0，Y=80，M=0，K=100，這樣可以解決效果出現灰色層，影響品質。當使用漸變效果：單彩色漸變到黑色時，將單黑填色修改一下，如：洋紅到黑的漸變，在黑色中改為：C=0，Y=0，M=100，K=100，這樣可以解決漸變效果在漸變層中出現灰色層，影響品質。）

8. In coreldraw9, when applied to gradients, rotation during composition is easy to cause errors in the direction of gradient layers. When applied to interactive effects (such as stereo effect and shadow effect), it is easy to cause effect displacement and loss when the version is compatible and rotated. Please separate the effect after making the effect, and then turn the dot matrix again. (warm tip: if the shadow effect is based on color, please modify the single black filling of the shadow. For example, if the base map is yellow, add an appropriate amount of yellow in the black of the effect, C = 0, y = 80, M = 0, k = 100, which can solve the problem of gray layer in the effect and affect the quality. When using the gradient effect: single color gradient to black, modify the single black filling, such as : the gradient from magenta to black is changed to: C = 0, y = 0, M = 100, k = 100 in black, which can solve the gradient effect. The gray layer in the gradient layer affects the quality.)

感謝您的閱讀，此文的文章來源：濟南印刷包裝更多的內容和問題請點擊：http://buiy.cn我們會繼續努力的為您提供服務，感謝您的支持！

Thank you for reading. Source of this article: Jinan printing and packaging. For more contents and questions, please click: http://buiy.cn We will continue to work hard to provide you with services. Thank you for your support!