濟南臺歷掛歷印刷需要注意的幾個細節方面
來源:http://buiy.cn/ 發布時間:2020-12-25
如今的濟南臺歷掛歷印刷不僅是作為生活工具也在向家居裝飾方面發展,其精美的制作完全超過了它的使用功能。然而,一份精美的臺歷掛歷的制作完成也是不易的,需要具備設計創意和設計細節的處理,如設計完成后的印刷工作,它是關乎到掛歷是否精美、細致的關鍵要素。
Today's Jinan calendar printing is not only as a living tool, but also to the development of home decoration, its exquisite production completely exceeds its use function. However, it is not easy to make a beautiful calendar. It needs to have design creativity and design details. For example, the printing work after the design is completed, which is the key factor related to whether the calendar is exquisite and meticulous.
一份完美的臺歷掛歷的形成需要在印刷上下足功夫,需要注意印刷設計中的圖片、字體、色彩、輸出附件和檢驗等五個方面。濟南臺歷掛歷印刷
The formation of a perfect desk calendar needs to pay attention to the printing design in five aspects: picture, font, color, output accessories and inspection. Jinan calendar printing
一、臺歷掛歷印刷的圖片問題
1、 Picture problems in the printing of desk calendar and wall calendar
①關于psd文件,有一點需要注意,就是你導入它后不要再做任何“破壞性*作”。比如:旋轉,鏡像,傾斜等。由于它的透明蒙版的關系,輸出后產生破碎圖。
① One thing to note about PSD files is that you should not do any "destructive * work" after importing them. For example: rotation, mirror, tilt, etc. Because of its transparent mask, the output produces a broken image.
②還是蒙版,在coreldraw中使用也要小心些,必要時候還不如采取“置入容器”方法比較保險。
② Or mask, use in CorelDRAW should also be careful, if necessary, it is better to take the "put in container" method to be more secure.
③分辨率和重新取樣。不要在corel中做這個,“轉換為位圖”的確方便,但損失的是色彩還原,要點在ps中做好拿來。
③ Resolution and resampling. Don't do this in Corel, "convert to bitmap" is really convenient, but the loss is color restoration, the key is to do it in PS.
④所有圖片必須是cmyk或者灰度和單色bitmap圖。否則不能輸出。
④ All images must be CMYK or gray and monochrome bitmap. Otherwise, it cannot be output.
二、色彩的漸變問題
2、 The gradual change of color
①常見的問題是這樣:如紅色→黑色的漸變,設置錯誤:(M100→K100)中間會很難看。正確的設置應該是這樣:(M100→M100K100)仔細分析下就明白了,其他情況類推。
① The common problem is as follows: for example, if the gradient is red to black, the setting is wrong: (M100 → k100), and it will be hard to see in the middle. The correct setting should be as follows: (M100 → m100k100) after careful analysis, and so on.
②透明漸變是適用于網絡圖形的辦法,灰度圖也可,但完稿輸出不能用,因?yàn)榭臻g混合模式為RGB,屏幕混合色彩同印刷CMYK差異太大。切切注意。
② Transparent gradient is suitable for network graphics, gray image can also be used, but the finished output can not be used, because the spatial mixing mode is RGB, the screen mixed color is too different from the printed CMYK. Pay close attention.
③黑色部分的漸變不要太低,如5%黑色,由于輸出時有黑色疊印選項,低于10%的黑色通常使用的替代而不是疊印,導致出問題,同樣,使用純淺色黑也要小心。
③ The gradient of the black part should not be too low, such as 5% black. Due to the black overprint option in the output, the black below 10% usually uses the replacement instead of overprint, which leads to problems. Similarly, be careful when using pure light black.
濟南印刷廠講解的內容 更多的內容 請咨詢公司官網http://buiy.cn/相關新聞
- 手提袋印刷注意事項及紙張材質 2023-06-09
- 如何選擇高品質的印刷廠家 2023-06-07
- 包裝印刷基礎知識,你知道嗎? 2023-06-05
- 三種不同種類的記事本印刷適用范圍 2023-06-02