我們購物的時候，手里提的多的東西就是手提袋了。那你對手提袋是否有充分的認識，它在印刷時需要注意什么呢？下面濟南手提袋廠家為您講解一番：

When we shop, we carry a lot of things in our hands. Do you have a full understanding of the handbag? What should you pay attention to when printing it? Next, Jinan handbag manufacturer will explain to you:

材料及尺寸的選擇

Selection of materials and dimensions

在設計的時候其實就要先確定好需要什么材質的手提袋，印刷廠要注意客戶選擇的手提袋材質、尺寸、顏色等，然后根據其特點進行針對性的印刷。如材質方面是否需要覆膜，哪種印刷方式可以避免色差，怎么印刷可以將紙張充分利用等等？

In fact, when designing, we should first determine the material of the handbag. The printing factory should pay attention to the material, size and color of the handbag selected by the customer, and then carry out targeted printing according to its characteristics. For example, do you need film covering in terms of material, which printing method can avoid color difference, and how can you make full use of paper in printing?

油墨水的使用

Use of oil ink

既然是印刷，肯定就會使用到油墨，油墨的使用也是十分有技巧的。假如兩種不能相互融合的油墨混合到一起，對印刷的質量就會有很大的影響。另外，即使可以相互融合的油墨也需攪拌徹底，如果出現稀稠程度不一的油墨，一樣會影響手提袋印刷的質量。

Since it is printing, ink will certainly be used, and the use of ink is also very skillful. If two kinds of inks that cannot be fused with each other are mixed together, it will have a great impact on the quality of printing. In addition, even the inks that can be fused with each other need to be stirred thoroughly. If the inks with different thickness appear, the quality of the handbag printing will also be affected.

紙張PH值

Paper PH

印刷過程中合適的紙張PH值一般為中性，或者略帶堿性。這能讓水分充分揮發作用，加快干燥時間。測量紙張的酸堿度可用pH值試紙測定，也可用雷磁pH計測定。

The appropriate paper PH value in the printing process is generally neutral or slightly alkaline. This can make the water fully volatilize and speed up the drying time. The acidity and alkalinity of the paper can be measured by pH test paper, and also by the magnetic pH meter.

干燥時間

drying time

由于印刷是一瞬間就完成的動作，時間非常短暫，故對油墨水的干燥速度有特別的要求。如果干的很慢的話就會把前面所有的操作都白費了；假如油墨過多，在印刷完成后，要迅速對多余的油墨進行清洗，干了的話就很難清洗。用清水難以洗掉的話可以加入一點清洗劑。有時候也會為看避免油墨太多，在印刷油墨中也會加入一點干燥劑。

Because printing is an action completed in a flash and the time is very short, there are special requirements for the drying speed of oil ink. If you work very slowly, all the previous operations will be wasted; If there is too much ink, it is necessary to clean the excess ink quickly after printing. If it is dry, it is difficult to clean it. If it is difficult to wash off with water, you can add a little detergent. Sometimes, in order to avoid too much ink, a little desiccant will also be added to the printing ink.

后續加工工序

Subsequent processing procedures

手提袋除了主體的袋子印刷以外，還有可能設計手提袋手提繩子的加工和覆膜工藝等，這戲印刷工藝都是手提袋印刷后序的工序，一定要非常細致，即使繁瑣，也不能馬虎，否則非常容易造成材質的浪費。

In addition to the bag printing of the main body of the handbag, it is also possible to design the processing and film covering process of the portable rope of the handbag. This printing process is the post-process of the handbag printing. It must be very careful. Even if it is tedious, it should not be careless, otherwise it is very easy to cause material waste.

一個合格的手提袋除了好看，更要好用。在顏值上，賞心悅目，將的形象很好地展現出來。在使用上，有提手方便用戶攜帶，也方便用戶二次利用。承重能力要合適，切口部位要光滑圓潤不割手。更多相關內容就來我們網站http://buiy.cn咨詢！

A qualified handbag is better to use than good-looking. In terms of face value, it is pleasing to the eyes and shows the brand image well. In use, the handle is convenient for users to carry, and also convenient for users to reuse. The load-bearing capacity should be appropriate, and the cut part should be smooth and round without cutting hands. Come to our website for more relevant content http://buiy.cn consulting service