The quality of the brand of printing products depends on many factors, so it is necessary for manufacturers to pay more attention to the relevant matters when printing, so as to avoid the impact of problems. Here are a few things to consider.

　　掌握應用的印刷油墨特性。依據不一樣的宣傳手冊印件規定（如高端、中等、低擋的顧客印刷商品）、打印紙張?zhí)匦院陀『蠹庸すに囈?guī)定，采用不一樣特性（如高端、中等、低擋）的印刷油墨、防腐劑、防潮劑、去粘合劑……等輔材。

　　Master the characteristics of applied printing ink. According to different regulations of printing pieces in the brochure （such as high-end, medium and low block customer printing goods）， characteristics of printing paper and post-press processing technology, the use of different characteristics （such as high-end, medium and low block） printing ink, preservatives, moisture-proof agents, adhesives… And other auxiliary materials.

　　印雜志期刊、畫刊的商標logo、LOGO、廣告宣傳頁要保存多一張。印完后把全部雜志期刊、畫刊期的商標logo、LOGO、廣告宣傳頁梳理在一文件夾名稱里，便于于之后印刷各期的色調校準。

　　Print the trademark logo, LOGO, advertising pages of magazines, magazines and pictures to save one more. After printing, all the trademark logo, logo and advertising pages of the first issue of magazines, magazines and pictures are arranged in a folder name, which is convenient for the color calibration of each issue after printing.

　　在印刷宣傳手冊中若有淡墨不一致的商品，機器設備工作人員有義務作標識出去或取下。機器設備工作人員還可以要用字條分隔并且做好標明出去，以候選頁組質量檢驗工作人員精確的取下，防止不合格品注入下一工藝流程。

　　If there is inconsistent light ink in the printed brochure, the machine equipment staff has the obligation to mark out or remove. Machine equipment staff can also be separated and marked out with a note, to candidate page group quality inspection staff accurately removed, to prevent the injection of unqualified products into the next process.

　　印薄紙要填好標識卡，機器設備工作人員對不太好的印數要明確提出難題點和取下，避免不合格品注入下一工藝流程。

　　The identification card should be filled in for printing thin paper, and the machine and equipment staff should clearly put forward the difficult points and remove the bad printing number, so as to avoid the unqualified products being injected into the next process.

　　搞好留樣印數工作中。在顧客、印刷負責人簽樣后確定淡墨是的商品要用大頭筆以劃框架的方式搞好留樣標識，保證顧客印刷商品留樣印件沒有產品質量問題。

　　Do a good job in keeping the sample print number. After the customer and the person in charge of printing sign the samples to determine the best light ink goods to use a big pen to delimit the frame to do a good job of retention sample identification, to ensure that the customer printing products retention sample printing without product quality problems.

　　劃樣時要查驗色調是不是合乎打樣品的規范，無墨皮、沒有水干、無拖花、沒有底、無粘花、無粘后滾桶的狀況；套準文圖和正反兩面；側規、壓槽、規定是不是一致，版塊是不是整潔清理。

　　When drawing samples, we should check whether the color is in line with the specifications of the sample. There is no ink skin, no dry water, no drag flower, no bottom, no sticky flower, no sticky after rolling the barrel. Register text and positive and negative sides; Side gauge, pressure tank, provisions are consistent, the plate is clean.

　　濟南印刷包裝廠家認為若印刷全過程中對印刷版調整要留意淡墨，凡有色偏的商品不可以作留樣。印背面時，若設備或?qū)嶋H操作不穩定，應將留樣一部分取下，等設備運行一切正常后再上機操作印刷。

　　Ji 'nan printing and packaging manufacturers think that if the printing plate adjustment in the whole process of printing should pay attention to light ink, all colored goods can not be retained as samples. When printing the back, if the equipment or the actual operation is unstable, part of the sample should be removed, and then the machine can operate printing after the equipment runs normally.

　　提高產品印刷就要多注意相關事項就是這樣了，如果你你想知道更多問題或者事項的話，歡迎來此buiy.cn進行咨詢吧。

　　Improve the product printing brand will pay more attention to the relevant matters is so, if you want to know more questions or matters, welcome to this buiy.cn for consultation.