1. Bleeding line

畫冊印刷版面上的文字等內容需要距離裁切邊緣必須>3mm，以免裁切時被切到。

The text and other contents on the printed page of the album must be > 3mm from the cutting edge to avoid being cut during cutting.

2、轉曲

2. Turning curve

使用CoreIDRAW等軟件設計的作品，文字必須轉曲線或描外框，否則會出現字體缺失的情況。文字轉成曲線后，請注意字間或行間是否有跳行或互相重疊的錯亂現象。

For works designed with CoreIDRAW and other software, the text must be curved or outlined, otherwise the font will be missing. After the text turns into a curve, please pay attention to whether there is line skipping or overlapping disorder between words or lines.

盡量不要使用系統字，若使用會造成筆劃交錯處有白色節點。如果筆劃交錯處有白色節點時，以打散的指令處理即可。黑色文字不要選用套印填色。

Try not to use system words. If used, there will be white nodes at the interleaving of strokes. If there are white nodes at the stroke interleaving, it can be processed with scattered instructions. Do not use overprint for black text.

3、印刷色差

3. Printing color difference

彩色印刷中不能以螢幕或打印機列印的顏色來要求印刷色，客戶制作時必須參照CMYK色譜的百分數來決定制作填色。

In color printing, the printing color cannot be required by the color printed on the screen or printer. When making, the customer must refer to the percentage of CMYK chromatography to determine the color filling.

同時注意：不同廠家生產的CMYK色譜受采用的紙張、油墨種類、印刷壓力等因素的影響，同一色塊會存在差異。

At the same time, note that the CMYK chromatogram produced by different manufacturers is affected by the types of paper, ink, printing pressure and other factors, and the same color block will be different.

同一文檔在不同次印刷時，色彩都會有差異，印刷界公認的色差度在±10%內為正常（因墨量控制每次都會有不同所致）.

The color of the same document will vary at different times of printing, and the color difference recognized by the printing industry is normal within ± 10% (due to different ink control every time)

4、色塊使用

4. Color block use

彩色印刷中，色塊之配色請盡量避免使用深色或滿版色之組合，否則印刷后裁切容易產生背印的情況。勿用白色色塊遮掩，以免造成合版時之困擾。

In color printing, please try to avoid using the combination of dark color or full plate color for the color matching of color blocks, otherwise it is easy to produce back printing after printing. Do not use white color block to cover up, so as not to cause trouble during plate combination.

5、印刷底色

5. Printing background color

畫冊印刷底紋或底圖顏色不要低于10%，以避免印刷成品時無法呈現。

The color of album printing shading or base map shall not be less than 10%, so as to avoid being unable to appear when printing finished products.

以上的精彩內容就是小編今天為您提供的內容，更多的精彩內容來自：濟南畫冊印刷詳情請點擊我們的網站關注：http://buiy.cn

The above wonderful content is what Xiaobian provides for you today. More wonderful content comes from Jinan album printing. For details, please click our website to pay attention to: http://buiy.cn