Everyone is familiar with the handbag. It is widely used in the commodity packaging of clothing, food, shoes, gifts, tobacco and wine industries. Due to the needs of the use function and design, the printing and manufacturing process of the handbag has to go through a certain process. Today, we will briefly introduce it.

是必須經歷的手提袋的設計環節，很多手提袋是企業形象和商品廣告策略的延伸，因此選用的材料、裝飾的工藝和表現的形式都與紙袋的用途和功效密不可分。設計師應考慮紙張材料的經濟利用，工藝設計的合理性。為了生產和品質管控，設計時制作一套完整清晰的作業工程圖必不可少，多數情況下產品還需要經過打樣確認。設計中的打樣既是工藝的驗證，也是客戶確認的依據、生產的標本。

The first is the design link of the handbag that must be experienced. Many handbags are the extension of corporate image and commodity advertising strategy. Therefore, the selected materials, decoration technology and forms of expression are inseparable from the use and efficacy of paper bags. Designers should consider the economic utilization of paper materials and the rationality of process design. In order to control the production and quality, it is necessary to make a complete set of clear operation engineering drawings during the design, and in most cases, the products need to be proofed and confirmed. The proofing in the design is not only the process verification, but also the basis of customer confirmation and production samples.

設計完之后就是手提袋的印刷了，手提袋的印刷設計與一般印刷品不同，專色、滿版較多，用墨量大、顏色鮮艷。所以它的印刷工藝也與其它產品要求有所不同。印刷操作者要特別注意水墨平衡的控制，設備調整的狀態要好，否則容易發生水墨起杠，顏色的色差問題。

After the design, it is the printing of the handbag. The printing design of the handbag is different from that of the general printed matter. There are more spot colors and full plates, and the ink consumption is large and the color is bright. So its printing process is different from other products. The printing operator should pay special attention to the control of ink and water balance, and the equipment should be adjusted in a good state. Otherwise, it is easy to cause ink bar and color difference.

印刷完成之后要對印刷后的產品進行覆膜，覆膜一般有預涂和即涂?jī)煞N工藝，近年來覆膜工藝的性也有了較大的提高。覆膜也對增加手提袋色彩的濃度、提高產品的防水避污性能有著重要的作用。

After printing, the printed products should be covered with film. Generally, there are two processes of precoating and immediate coating. In recent years, the environmental protection of laminating process has been greatly improved. The film mulching also plays an important role in increasing the color concentration of the bag and improving the waterproof and anti fouling performance of the product.

覆膜完成之后就是對手提袋的模切加工和糊盒了，其中模切的質量直接影響紙袋成型品質和手工糊制效率。糊盒主要依賴于手工完成，是整個紙袋工藝流程中效率低的一個環節。經手工糊制完成的手提紙袋基本已經成型，有些手提紙袋還有后一道工序——沖孔、穿繩等作業，從而完成手提紙袋的成型包裝。

After the completion of lamination is the hand bag die-cutting processing and paste box, in which the quality of die-cutting directly affects the paper bag forming quality and manual paste efficiency. Paste box mainly depends on manual completion, which is the lowest efficiency link in the whole paper bag process. The hand-held paper bags made by hand have been basically formed. Some hand-held paper bags have the last process - punching, threading and other operations, so as to complete the forming and packaging of the hand-held paper bags.