Printing is a job that must pay attention to details, so is bag printing. If we don't pay attention to details, there will be problems, which will make us lose a lot. Xiaobian would like to introduce to you what problems should be paid attention to in the enterprise handbag printing.

1、油墨使用注意，在手提袋印刷過程中，一定要注意同種油墨，一些時候人們將不同性質的油墨混合，但是兩者卻無法相容，終影響了手提袋的印刷質量，這就得不償失了。

1. Pay attention to the use of ink. In the process of bag printing, we must pay attention to the same kind of ink. Sometimes people mix different kinds of ink, but the two are not compatible, which ultimately affects the printing quality of the bag, which is not worth the loss.

2、注意油墨的保護，油墨性質不是很穩定，很容易出現問題，所以在進行印刷的時候一定要注意保護。要做到避免陽光直射，其次是溫度要適中，不要低于10攝氏度，也不要高于26攝氏度。

2. Pay attention to the protection of ink, ink properties are not very stable, it is easy to have problems, so when printing, you must pay attention to protection. First of all, we should avoid direct sunlight. Secondly, the temperature should be moderate. It should not be lower than 10 ℃ or higher than 26 ℃.

手提袋印刷工藝：亮膜、啞膜、燙金、燙銀、擊凸、局部上光、袋底擋板、其它特殊工藝等

Hand bag printing process: bright film, dumb film, stamping, silver stamping, bumping, local glazing, bag bottom baffle, other special processes

手提袋印刷主要有以下幾種紙張：

The following kinds of paper are mainly used for bag printing:

白卡紙：230克 ，250克，300克，350克

White cardboard: 230g, 250g, 300g, 350g

山東印刷廠

Shandong printing factory

銅版紙：180克，200克，250克，300克

Coated paper: 180g, 200g, 250g, 300g

白板紙：250克，300克，350克

Whiteboard: 250 g, 300 g, 350 g

白牛皮紙：180克，200克，260克

Kraft paper: 180 g, 200 g, 260 G

3、干稀度問題，油墨如果不經常攪拌很容易出現粘結現象，山東印刷廠小編告訴您而油墨如果太稀對于印刷也會有很大的影響，所以這兩點一定要注意。

3. Dry thinness problem, if the ink is not often stirred, it is easy to stick, Shandong printing factory small editor told you, and if the ink is too thin for printing will also have a great impact, so we must pay attention to these two points.

4、水在印刷中非常重要，因?yàn)樗芸刂扑扯龋€可以平衡PH值。一旦我們發現PH值沒有控制好，一定要注意使用水來進行調節。

4. Water is very important in printing because it can control the ink viscosity and balance the pH value. Once we find that the pH value is not well controlled, we must pay attention to the use of water to adjust.

5、干燥問題，因?yàn)楝F(xiàn)代印刷都是機器的大規模印刷，所以速度是非?？斓?，這就會在一定程度上影響油墨的干燥。一定要保證油墨的干燥速度，因?yàn)楦稍锏倪^(guò)慢，就會出現花版面的問題。

5. Drying problem, because modern printing is a large-scale printing machine, so the speed is very fast, which will affect the drying of ink to a certain extent. Be sure to ensure the drying speed of the ink, because the drying is too slow, there will be a flower layout problem.