我們購物的時候，手里提的多的東西就是手提袋了。那你對手提袋是否有充分的認識，它在印刷時需要注意什么呢？下面從幾個方面來講下吧。

When we shop, the most thing we carry in our hands is a handbag. Do you have a good understanding of your handbag? What should you pay attention to when printing it? Let's talk about it from several aspects.

材料及尺寸的選擇

Selection of materials and sizes

在設計的時候其實就要先確定好需要什么材質的手提袋，印刷廠要注意客戶選擇的手提袋材質、尺寸、顏色等，然后根據其特點進行針對性的印刷。如材質方面是否需要覆膜，哪種印刷方式可以避免色差，怎么印刷可以將紙張充分利用等等。

In fact, when designing the handbag, we should first determine the material we need. The printing factory should pay attention to the material, size, color, etc. of the handbag selected by the customer, and then carry out targeted printing according to its characteristics. Such as whether the material needs to be covered with film, which printing method can avoid color difference, how to print and make full use of paper, etc.

油墨水的使用

Use of oil ink

既然是印刷，肯定就會使用到油墨，油墨的使用也是十分有技巧的。假如兩種不能相互融合的油墨混合到一起，對印刷的質量就會有很大的影響。另外，即使可以相互融合的油墨也需攪拌，如果出現稀稠程度不一的油墨，一樣會影響手提袋印刷的質量。

Since it is printing, ink will certainly be used, and the use of ink is also very skillful. If two kinds of inks that cannot be fused with each other are mixed together, it will have a great impact on the quality of printing. In addition, even the inks that can be fused with each other need to be stirred. If there are inks with different thicknesses, it will also affect the quality of handbag printing.

紙張PH值

PH value of paper

印刷過程中合適的紙張PH值一般為中性，或者略帶堿性。這能讓水分充分揮發作用，加快干燥時間。測量紙張的酸堿度可用pH值試紙測定，也可用雷磁pH計測定。

The suitable pH value of paper in the printing process is generally neutral or slightly alkaline. This can make the water volatilize fully and speed up the drying time. The pH value of the paper can be measured with pH test paper or with a magnetometer.

干燥時間

drying time

由于印刷是一瞬間就完成的動作，時間非常短暫，故對油墨水的干燥速度有特別的要求。如果干的很慢的話就會把前面所有的操作都白費了；假如油墨過多，在印刷完成后，要迅速對多余的油墨進行清洗，干了的話就很難清洗。用清水難以洗掉的話可以加入一點清洗劑。有時候也會為看避免油墨太多，在印刷油墨中也會加入一點干燥劑。

Because printing is completed in an instant and the time is very short, there are special requirements for the drying speed of oil ink. If you work very slowly, all the previous operations will be wasted; If there is too much ink, it is necessary to quickly clean the excess ink after the printing is completed. If it is dry, it is difficult to clean it. If it is difficult to wash off with clean water, you can add a little detergent. Sometimes, in order to avoid too much ink, a little desiccant will be added to the printing ink.

后續加工工序

Subsequent processing procedures

濟南印刷手提袋除了主體的袋子印刷以外，還有可能設計手提袋手提繩子的加工和覆膜工藝等，這戲印刷工藝都是手提袋印刷后序的工序，一定要非常細致，即使繁瑣，也不能馬虎，否則非常容易造成材質的浪費。

In addition to the bag printing of the main body of Jinan printed handbags, it is also possible to design the processing and film covering process of the hand-held rope of handbags. The printing process of this play is the process after the printing of handbags. It must be very detailed, even if it is cumbersome, it cannot be sloppy, otherwise it is very easy to cause a waste of materials.

此外一個合格的手提袋除了好看，更要好用。在顏值上，賞心悅目，將的形象很好地展現出來。在使用上，有提手方便用戶攜帶，也方便用戶二次利用。您有印刷需求就來關注我們網站http://buiy.cn咨詢更多吧。

In addition, a qualified handbag is not only good-looking, but also better to use. In terms of appearance, it is pleasing to the eye and displays the brand image well. In use, there is a handle for users to carry and reuse. If you have printing needs, please follow our website http://buiy.cn Consult more.